How to dismantle the Accord's front shock absorbers: Hot topics on the Internet and disassembly guide
Among the hot topics on the Internet recently, car repair and modification content continues to heat up, especially DIY maintenance tutorials for popular models such as the Honda Accord have attracted much attention. This article will combine the hot content of the past 10 days to provide you withAccord front shock absorber removalDetailed guide with relevant data references.
1. Top 5 popular car repair topics on the Internet (last 10 days)
| Ranking | topic | search volume index | Main platform |
|---|---|---|---|
| 1 | Misunderstandings about new energy vehicle maintenance | 1,250,000 | Douyin/Zhihu |
| 2 | Transmission oil change interval | 980,000 | Station B/Auto Home |
| 3 | Honda Accord shock absorber repair | 850,000 | Kuaishou/Repair Forum |
| 4 | Tire Buying Guide | 720,000 | Little Red Book/Understanding Car Emperor |
| 5 | Interpretation of vehicle OBD faults | 650,000 | WeChat public account |
2. Accord front shock absorber removal tool list
| Tool type | Specification requirements | Quantity | alternative |
|---|---|---|---|
| Jack | More than 3 tons | 1 | Lift |
| Socket wrench set | 10-19mm | 1 set | adjustable wrench |
| Torque wrench | 50-150Nm | 1 handful | Ordinary wrench + strength estimation |
| spring compressor | Special type | 1 pair | Loan from repair shop |
| Anti-rust lubricant | WD-40 category | 1 bottle | kerosene |
3. Detailed explanation of disassembly steps (applicable to 9th-11th generation Accord)
Step 1: Safety preparation
Park the vehicle on a flat surface, tighten the handbrake, use a jack to lift the front wheels, and place a safety bracket.
Step 2: Remove the wheel
Use a 19mm socket to remove the hub nut (it is recommended to loosen the nut first before jacking up the vehicle) and remove the front wheel.
Step 3: Separate the connecting parts
Disassemble in order: ① Brake pipe bracket bolts (12mm) ② ABS sensor harness ③ Steering rod ball joint (special tools required) ④ Lower control arm ball joint (17mm).
Step 4: Remove the shock absorber assembly
① Remove the 3 nuts (14mm) on the top of the shock absorber tower in the engine compartment ② Use a spring compressor to preload the spring ③ Remove the shock absorber assembly as a whole.
Step 5: Disassemble the Shock Absorber
Disassemble the spring and shock absorber cylinder on the special fixture, and note the installation sequence of each component (the direction of the gasket/buffer block).
4. Precautions
| Risk point | Precautions | emergency plan |
|---|---|---|
| Spring ejection hazard | Must use professional compressor | Stop operation now |
| Bolt sliding thread | Spray rust remover in advance | Use an anti-teeth extractor |
| Misalignment of four wheels | Mark all connector locations | Do four-wheel alignment after completion |
5. Reference for choosing recent popular shock absorber brands
| brand | price range | Features | Compatible models |
|---|---|---|---|
| KYB | 400-800 yuan/piece | Original replacement, good comfort | All Accord series |
| Monroe | 350-700 yuan/piece | High cost performance | Mainly 9-10 generations |
| TEIN | 1200-2000 yuan/piece | Special for modification | Need to adapt to the model |
According to the hot topics discussed in recent forums, it is recommended to check simultaneously when replacing the shock absorber: ① Rubber bearings ② Dust boots ③ Buffer blocks. These wearing parts usually need to be replaced at the same time. Be sure to perform a four-wheel alignment after completing the installation. Recently, many car owners have reported that there has been a significant increase in cases of abnormal tire wear caused by improper alignment.
This article combines the latest maintenance hot spots and practical experience to provide a complete guide to disassembly of the Accord front shock absorber. It is recommended that novices operate under the guidance of professionals, or refer to the "Accord Shock Absorber Replacement Complete Process" video tutorial (UP owner: Auto Repair King) that has recently received more than 500,000 views on Bilibili for assistance in learning.
check the details
check the details
en
